RubberShox®

Modular Universal Natural Rubber Suspension Bump Stop - SUB Module (Set of 2)

UB2

The UB2 module is a sub module for use with the RubberShox patented UB series of modular bump stops. UB2 is sandwiched in between UB1 base and UB3 end modules to extend total bump stop height. The rubber firmness is 60A (for softer 45A, see UB2F). Compatible with any UB1 and UB3 variations.

The RubberShox UB series is a patented, modular bump stop replacement solution. Combine the base UB1 module with one or more interlocking UB2 submodule(s) and a UB3 end module to customize the height of your bump stop.

UB2F
The UB2F module is a sub module for use with the RubberShox patented UB series of modular bump stops. UB2F is sandwiched in between UB1 base and UB3 end modules to extend total bump stop height. The rubber firmness is 45A (for firmer 60A, see UB2). Compatible with any UB1 and UB3 variations.

The RubberShox UB series is a patented, modular bump stop replacement solution. Combine the base UB1 module with one or more interlocking UB2 submodule(s) and a UB3 end module to customize the height of your bump stop.

Features

UB2

UB2 is a sub-module of a patented, modular, universal rubber bump stop system. Requires use of, and is sandwiched between, UB1 base and UB3 end-module for installation.
Dimensions: 1.85” height x 4” width. Combine with UB1 and/or UB3 modules to increase height. UB1: 1.4”, UB3: 2.91”.
Customizable height: UB1+UB2+UB3 = 5.5”H. UB1+UB2+UB2+UB3= 7”H. UB1/UB3
modules not included.
Heavy Duty: Each unit supports 2500 lbs, or 5000 lbs per axle. Hardness: 60A.
Disclaimer: These do not increase vehicle load capacity. Refer to your vehicle’s factory GVWR and payload rating before operation. Always follow applicable laws/regulations during operation and exercise discretion.

UB2F

UB2F is a sub-module of a patented, modular, universal rubber bump stop system. Requires use of, and is sandwiched between, UB1 base and UB3 end-module for installation.
Dimensions: 1.85” height x 4” width. Combine with UB1 and/or UB3 modules to increase height. UB1: 1.4”, UB3: 2.91”.
Customizable height: UB1+UB2+UB3 = 5.5”H. UB1+UB2+UB2+UB3= 7”H. UB1/UB3
modules not included.
Heavy Duty: Each unit supports 2500 lbs, or 5000 lbs per axle. Hardness: 45A.
Disclaimer: These do not increase vehicle load capacity. Refer to your vehicle’s factory GVWR and payload rating before operation. Always follow applicable laws/regulations during operation and exercise discretion.